TruSculpt ID vs Coolsculpting: An In-Depth Comparison

TruSculpt ID vs Coolsculpting: An In-Depth Comparison

Understanding Trusculpt ID and Coolsculpting

Regarding non-invasive fat reduction treatments, you might encounter two options: truSculpt ID and Coolsculpting. To help you understand the differences and benefits of each, here is a brief overview:

TruSculpt ID is a non-invasive body contouring treatment that utilizes radiofrequency technology to break down fat cells. This highly versatile treatment can be used on any area of the body with excess fat.

With this fat removal treatment, you can expect a more personalized approach, as it targets fat cells without relying on “pinchable” fat areas. This makes it a customized option for individuals with various body shapes and types.

CoolSculpting, on the other hand, is also a non-invasive fat reduction treatment that uses cryolipolysis technology to freeze and break down fat cells.

While this treatment has been widely advertised and recognized, it may not be the best option for everyone due to its limitations in the treatment area.

In summary, both of them offer fat-reduction solutions with proven results. However, truSculpt iD provides more versatility in treating various body areas and shows slightly higher fat reduction rates.

How Trusculpt ID and Coolsculpting Work?

During the TruSculpt ID procedure, a device is placed on your skin, which emits radiofrequency energy. This energy generates heat penetrating the skin and targeting the fat layer beneath. The heat effectively destroys the fat cells without causing damage to the surrounding tissues.

The treated fat cells are then naturally eliminated by your body’s lymphatic system over several weeks, resulting in a slimmer, more contoured appearance. In addition, the process promotes skin tightening, which can enhance the overall result.

While, CoolSculpting is based on the principle of cryolipolysis, which involves using controlled cooling to freeze and destroy fat cells. During the treatment, a vacuum applicator is applied to the targeted area, and the fat layer is cooled to a freezing temperature. This process causes the fat cells to undergo cell death without harming the surrounding tissues.

Your body naturally processes and expels the destroyed fat cells over time, resulting in a reduced fat layer of up to 25% in the treated area. CoolSculpting is effective for specific areas of fat that can be squeezed between the treatment panels, as opposed to the more versatile TruSculpt ID. The procedure may cause some temporary discomfort, which can feel like a tugging or tingling sensation.

Overall, both TruSculpt ID and CoolSculpting are effective treatment options for fat reduction, employing radiofrequency heat and controlled cooling technologies, respectively.

Procedure Details of Trusculpt ID and CoolSculpting

Procedure Details of Trusculpt ID and CoolSculpting

Trusculpt ID uses monopolar radiofrequency (RF) energy to target and eliminate fat cells. During the procedure, a medical professional uses a hand-held device or a hands-free attachment to emit RF energy into the targeted areas, effectively heating the fat cells and causing them to break down.

Each treatment session typically lasts about 15 minutes, and the sensation during the procedure can be compared to a hot stone massage. You may experience warmth and mild discomfort, but this should subside quickly as the treatment progresses. The number of sessions required to achieve the desired results varies depending on the individual and the treatment areas.

CoolSculpting eliminates fat cells by freezing them. During the treatment, a fat roll is placed between two panels that cool the fat to a freezing temperature. This process is called cryolipolysis and it effectively kills the fat cells, which are then naturally eliminated by the body.

Depending on the treated area, the session can last anywhere from 35 minutes to an hour. You may feel some tugging and mild discomfort during the procedure as the applicator suctions the targeted area. CoolSculpting is suitable for treating specific “pinchable” areas of fat, such as the abdomen, love handles, inner and outer thighs, and back fat.

Targeted Areas and Effectiveness of Trusculpt ID and Coolsculpting

Trusculpt ID is particularly effective in problem areas where fat seems more stubborn, such as the arms, abdomen, thighs, buttocks, and lower back. The treatment resulted in a fat loss of about 24%.

The procedure offers a few key advantages:
• Averages 24%-32% fat reduction per session
• Treats any area of the body without limitations
• No downtime required

Coolsculpting is best suited for healthy individuals who are at or near their target weight but still have trouble eliminating pockets of fat in areas like the abdomen, upper arms, chin, neck, back, and love handles.

This procedure is also effective, but has some limitations:
• Averages 20-25% fat reduction per session
• Requires a specific area of fat that can be squeezed between the treatment panels
• Mostly suited for “pinchable” fat areas

Coolsculpting and Trusculpt: Which one is better

Coolsculpting and Trusculpt: Which one is better

Treatment Time

Both TruSculpt iD and CoolSculpting require therapeutic temperatures to remove fat. However, the time it takes for each treatment varies. TruSculpt iD uses heat and can reach the necessary temperature quickly, generally taking around 15 minutes per treatment area. On the other hand, CoolSculpting takes more time as it relies on freezing the fat cells. It typically takes 105 minutes per treatment area. Moreover, CoolSculpting also requires six post-treatment lymphatic massage sessions, which are not needed with TruSculpt iD.

Comfort Level

The comfort level during the treatments differs as well. Patients have reported that TruSculpt iD feels like a hot stone massage, with skin temperature rising but not to an uncomfortable level. Conversely, CoolSculpting may cause some discomfort due to the pulling, tugging, pinching, cramping, and intense cold sensation felt as the treatment gets to work. If you have a low pain threshold, TruSculpt iD might be the better choice for you.

The Needed Time to See Effectiveness

TruSculpt ID utilizes radiofrequency energy to heat the fat cells in stubborn areas, destroying them. As your body naturally flushes out these destroyed cells, you’ll notice a reduction in the treated areas. In addition to fat reduction, TruSculpt ID tightens the skin, which can help improve the appearance of skin laxity.

Typically, you can expect noticeable results within 6-8 weeks after your truSculpt ID treatment. It’s important to note that individual results may vary, and multiple sessions might be required to achieve your desired outcome. To maintain your results, following a healthy diet and exercise routine is recommended.

Some key points about TruSculpt ID results include:

  • Fat reduction and body sculpting
  • Improvement in skin tightening and laxity
  • Noticeable results within 6-8 weeks
  • Possible requirement of multiple sessions

CoolSculpting, on the other hand, employs controlled cooling to eliminate unwanted fat cells selectively. While CoolSculpting can effectively reduce fat in certain areas, it does not provide the same skin-tightening benefits as TruSculpt ID.

Visible results from CoolSculpting can typically be observed within 3-4 months after your treatment. Like TruSculpt ID, individual results may vary, and you may need additional sessions to reach your desired goals. A healthy lifestyle is essential for maintaining your CoolSculpting results.

Key points about CoolSculpting results entail:

  • Reduction of unwanted fat cells through cryolipolysis
  • No significant skin tightening effects
  • Results visible within 3-4 months
  • The potential need for multiple sessions

Potential Side Effects

When considering TruSculpt iD, it is important to be aware of potential side effects. Some common side effects include skin sensitivity and mild aching in the treated area. These symptoms are generally temporary and should subside within a few days.

  • Skin Sensitivity: You may experience some redness, swelling, or warmth in the treated area. This is typically mild and resolves within a few hours to a couple of days.
  • Aching: Mild aching or discomfort may occur in the treatment area after your session. This sensation usually subsides within a day or two.
  • Warmth

Coolsculpting has its share of potential side effects, although they are usually minor. Some of the most common side effects include bruising, skin sensitivity, and aching. Here are some details about these side effects:

  • Bruising: Coolsculpting can sometimes cause bruising at the treatment site, which typically fades within a week or two. To minimize bruising, your provider may suggest some gentle post-treatment care.
  • Skin Sensitivity: Similar to truSculpt iD, you may experience some redness, swelling, or warmth in the treated area. This is usually mild and resolves within a few hours to a couple of days.
  • Aching: Aching or discomfort may also occur in the treated area after Coolsculpting. This sensation generally subsides within a day or two.
  • Coldness

These side effects are generally mild and will subside within three to ten days. There is no recovery or downtime associated with either treatment, allowing you to resume your normal activities shortly after your session. In general, it is crucial to follow any post-treatment instructions provided by your healthcare provider and to report any severe side effects immediately. By doing so, you can ensure a smoother recovery process and achieve the best possible results from your chosen body contouring treatment.

Candidates for Coolsculpting or truSculpt ID Treatment

Candidates for Coolsculpting or truSculpt ID Treatment
Candidates for Coolsculpting or truSculpt ID Treatment

Who Can Benefit

TruSculpt ID and CoolSculpting differ in some aspects which may make one procedure more suitable for certain individuals to get maximum results:

TruSculpt iD:

  • Ideal for patients with a BMI of less than 30.
  • Works on any body area, as the treatment does not require the fat to be “pinchable.”
  • Uses radiofrequency to heat and destroy fat cells.


  • It is best suited for individuals with a BMI of less than 30 and “pinchable” fat.
  • Applicable to areas like abdomen, love handles, inner and outer thighs, bra fat, and back fat where the applicators can be properly applied.
  • Uses cryolipolysis, a process of freezing fat cells.

Before deciding on a treatment, it’s crucial to schedule a consultation with a professional to determine if you are a good candidate for either procedure. During the consultation, your provider will evaluate factors such as your medical history, BMI, and the targeted areas for fat reduction to recommend the most appropriate procedure for you. Remember to ask any questions or address concerns during this process to ensure you make an informed decision.

How Old is Suitable to Get Body Sculpting Treatments?

Before Coolsculping and TruSculpt procedures, it’s important to be aware of the age requirements. Most providers and clinics generally recommend that individuals seeking these treatments be at least 18 years old. This is because the human body is still growing and developing during adolescence, and getting such treatments at a younger age could potentially interfere with this natural process.

It’s essential to consult with a professional provider before pursuing any body sculpting treatment. They can assess your individual needs, taking into account your age, medical history, and specific goals for the treatment. Remember, while these treatments can help you target stubborn fat areas, they are not intended as a solution for weight loss. Maintaining a healthy lifestyle, including a balanced diet and exercise, plays a critical role in achieving long-term results.

Other Body Contouring Alternatives

Apart from Coolsculpting and TruSculpt ID, you have several other body contouring alternatives to choose from. We will explore these options under three main categories: Liposuction, Laser Lipolysis, and Ultrasound Procedures.


Liposuction is a popular surgical option for body contouring. During this procedure, a plastic surgeon removes excess fat deposits from specific areas of your body. Liposuction is particularly effective in eliminating stubborn pockets of fat that are resistant to diet and exercise. However, unlike non-invasive body contouring treatments, liposuction involves surgery, anesthesia, and a longer recovery time.

Laser Lipolysis to Sculpsure and Emsculpt

Laser Lipolysis is another category of body contouring treatment using laser energy to melt and break down fat cells. Two popular laser-based methods are Sculpsure and Emsculpt.

Sculpsure is a non-surgical treatment that utilizes controlled laser technology to target and reduce fat cells in specific areas. Sculpsure is a non-surgical fat reduction procedure with minimal downtime.

Emsculpt, on the other hand, is mainly focused on increasing muscle mass and improving muscle tone. It uses electromagnetic energy to stimulate muscles, resulting in improved muscle strength and definition. While Emsculpt can eliminate a small amount of fat due to muscle activation, its primary purpose is muscle toning, not fat reduction.

Ultrasound Procedures

Ultrasound-based procedures use high-frequency sound waves to target and destroy fat cells selectively. This non-invasive body contouring method is generally safe and effective, with minimal side effects and downtime. A well-known example of an ultrasound treatment is UltraShape.

UltraShape is a non-surgical method that uses focused ultrasound energy to break down fat cells. The procedure is painless, and the results are visible within a few weeks. It is a non-surgical body sculpting treatment with virtually no recovery time.

When considering body contouring options, you should always consult with a qualified professional to determine the most suitable treatment for your specific goals and needs.

Frequently Asked Questions

When will I see the results of TruSculpt® ID or CoolSculpting?

It takes various times to see if TruSculpt iD and CoolSculpting treatments achieve your desired results.

Typically, you can expect to see results from TruSculpt iD within 6 to 12 weeks post-treatment. Whereas CoolSculpting leads as early as 4 weeks, and optimal results generally take about 12 weeks to become apparent. Keep in mind that every individual’s body responds differently to treatments, and these timeframes may vary for each person.

Are the results obtained permanent?

Both TruSculpt iD and CoolSculpting are designed to offer permanent fat reduction by destroying and eliminating fat cells in the treated areas. Once the fat cells are removed, they cannot regenerate. However, it’s essential to maintain a healthy lifestyle, including a balanced diet and regular exercise, to prevent the remaining fat cells from expanding and negating the effects of treatment.

About Osano

Are you planning to open your own beauty salon?  Look no further than OSANO, the leading factory in China for unique and customizable beauty machines.  Our machines are designed to meet your specific needs, with the option to customize the machine in your language and print your logo on it free of charge.

Our machines function exactly the same as the original ones, but at a much better price, allowing you to reduce the cost of opening a beauty salon.  Plus, we provide a 1-year warranty and online guidance and video instruction to assist you in the operation of the machine.

Don’t just take our word for it – see our machines in action at our offline exhibitions abroad, such as Cosmoprof Worldwide Bologna.  Check out our official website for more information about the exhibition and get a first-hand grasp of our latest R&D dynamics.

Choose OSANO for your beauty machine needs and take your salon to the next level.

Recent Posts

OSANO Beauty Equipment in Cosmoprof Bologna 2016

Good Performance of OSANO Beauty Equipments in Cosmoprof Bologna 2016
Read More →

INTERCHARM 2016 Moscow

OSANO will attend INTERCHARM 2016 in Moscow from 26th to 29th Oct. Welcome to visit our ...
Read More →

Cosmoprof Worldwide Bologna 2017

OSANO will participate in Cosmoprof Worldwide Bologna 2017 from 17th to 20th March. Welcome to ...
Read More →

Dubai Derma 2017

OSANO will participate in Dubai Derma 2017 from 27th to 29th March. Welcome to visit ...
Read More →

OSANO Aesthetic Devices and Cosmoprof Bologna 2017

Good Performance of OSANO Aesthetic Devices in Cosmoprof Bologna 2017 Innovative Cryolipolysis Devices FREEZE CONTOUR ...
Read More →

OSANO Aesthetic Devices And Dubai Derma 2017

Good Performance Of OSANO Aesthetic Devices In Dubai Derma 2017 Innovative Cryolipolysis Devices FREEZE CONTOUR ...
Read More →
Scroll to Top